This tire pressure monitoring system sensor assembly SET are a brand new, aftermarket sensors. They are designed to replace all original equipment manufacturers including:

• Beru, Lear, Pacific, Schrader, Siemens, TRW

This tire pressure monitoring sensor SET features the following specifications:

• SET of 4 Sensor assemblies. One for each wheel
• Replaces dealer part numbers: 68001698AA, 68001698AB
• Each sensor assembly consists of the following new components:
  • Tire Pressure Monitor Sensor (TPMS)
  • Attachment Screw
  • Valve Stem
  • Nickel Plated Valve Core
  • Gasket
  • Washer
  • Locking Nut
  • Valve Stem Cap
• Built to strict quality control standards
• 100% tested prior to leaving the factory
• New two-piece sensor design allows valve stem flexing from 5 to 26 degrees helping to eliminate breaking

Typical reasons why the sensors should be replaced:

• Valve stem type TPMS sensors require installation of new hardware whenever a tire is is changed
• Valve leak
• Seal leak
• Battery in sensor becomes weak or dies (average battery life is 5 years). All sensors will eventually need to be replaced
• Valve core snaps off
• Recommended to replace TPMS hardware every time a tire is removed from the rim to prevent corrosion buildup and for mounting safety of the locking nut

This tire pressure monitoring sensor SET makes great replacements and with the new 2 piece design allows the valve stem to be serviced separately!

This part requires Programming to function properly. Please consult your owners manual or qualified repair shop for proper procedure.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.
Shipping is not available to Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.   

This item can only be shipped to a physical address within the 48 contiguous U.S. states.